Caution:
The red terminal is positive pole.
The Black terminal is negative pole. Please connect them correctly, otherwise the fuse will be burned.
Before the connection, please make sure the inverter is turned off.
| 12V/24V/48V | ||||||||||
| DC Voltage | ||||||||||
| Output | AC Voltage | 100V/110V/120V/220V/230V/240V | ||||||||
| Environment | Rated Power | 1200W | 2000W | 3000W | 4000W | 5000W | 6000W | 7000W | 8000W | |
| Surge Power | Load 120~150%(3min.);4000W（3sec;resistive) | |||||||||
| Waveform | Pure Sine Wave(THD<3%) | |||||||||
| Frequency | 50Hz/60Hz ±0.05% | |||||||||
| Power Factor Allowed | COSθ-90°~COSθ+90° | |||||||||
| Standard Receptacles | USA/British/Franch/Schuko /UK/Australia/Universal etc. optional | |||||||||
| LED Indicator | Green for power on, red for faulty status | |||||||||
| USB port | 5V 2.1A | |||||||||
| LCD display | voltage, power, protection status ( optional) | |||||||||
| Remote controller | CRW80 / CR80 / CRD80 optional | |||||||||
| Efficiency(Typ.) | 89%~93% | |||||||||
| Over Load | Shut down output voltage , restart to recover | |||||||||
| Over Temperature | Shut down output voltage , recover automatically after temperature goes down | |||||||||
| Output Short | Shut down output voltage , restart to recover | |||||||||
| Earth Fault | Shut off o/p when the load has electrical leakage | |||||||||
| Soft Start | Yes, 3-5 Seconds | |||||||||
| Working Temp. | 0~+50℃ | |||||||||
| Working Humidity | 20~90%RH non-condensing | |||||||||
| Storage Temp.&Humidity | -30 | |||||||||
